We are certificated installers of EN795 Anchors, in addition we offer a full inspection and testing service. Installation and testing is carried out in accordance with BS7882:2005, EN795



EN795 Stainless steel anchor eye bolt which can be bonded into concrete with resin or bolted through most materials to provide a secure anchor for fall arrest, work restraint or work positioning use.


Testing to BS7883:2005, using the Hydra Jaws hydraulic testing device. Each anchor is load tested to 6kN for a period of 15 seconds, each anchor and the substrate into which it is secured should not show any visible signs of failure. Anchors are also mounted and bolted through the substrate, these are disassembled, inspected for corrosion or damage to the substrate and re-fitted using new locking nuts.





Print Print | Sitemap
© Specialist Training Consultants Ltd.